InMode Lifting, considering skin thickness and muscle condition

Key Differentiator 1: FX & FORMA Procedures Adhering to Quantitative Principles

InMode FX (fat reduction) and FORMA (collagen lifting) procedures have a maximum output value. Therefore, sufficient treatment time and energy are required to achieve the desired results.

At our clinic, for FX procedures, the device operating time is set to 6 minutes or more, and for FORMA procedures, the energy value applied is 10K or more.

In some cases, there is a concern that less energy than actual is delivered due to the use of a self-timer method. We adhere to treatment standards to ensure that the prescribed energy is sufficiently delivered.

Treatments must be performed directly by medical professionals for safety and expected effectiveness. Our medical team personally handles all treatment procedures, performing them delicately with experienced know-how.

Key Differentiator 2: Know-how for Fast and Precise Temperature Control during FX Procedures

The purpose of FX procedures is to break down fat cells. To achieve this, it is important to raise and continuously maintain tissue temperature above a certain level.

While minimizing discomfort for our patients, we focus on quickly reaching and stably maintaining the target temperature of the treated area.

For stable treatment, we delicately adjust various factors including output intensity, suction pressure, treatment speed and sequence, and individual skin reactions.

✓ By using maximum output to deliver sufficient energy, we ensure that the temperature of the treated area rises quickly.

✓ We apply an appropriately long pulse duration. By increasing the radiofrequency energy injection time, we efficiently boost the energy delivered to the tip, thereby inducing a faster temperature rise.

✓ Along with the InMode device's real-time temperature monitoring, our medical staff delicately checks the temperature of the treated area with their hands. This method helps maintain patient comfort and enhances treatment safety.

✓ We precisely adjust the movement speed for each treatment area. Initially, we ensure heat is evenly distributed across the entire skin, then we concentrate on raising the temperature intensively in specific areas of concern with more fat. This delicate approach helps reduce discomfort during treatment and allows for better results.

Key Differentiator 3: Delicate Treatment Design to Minimize the Possibility of Cheek Hollowing

FX procedures utilize the principle of fat reduction. Therefore, a design process tailored to each individual's face is crucial before treatment.

If the treatment is not performed carefully, undesirable results such as cheek hollowing may occur. We proceed with treatment after thorough consultation with the director to meticulously design for asymmetry or areas of concern.

We precisely analyze each patient's facial shape and fat distribution. Based on this, we create a customized treatment plan that can achieve harmonious and natural improvements.

Key Differentiator 4: Transparency of the Process Through Quantitative Verification After Treatment

After the treatment, we directly show patients the actual treatment time and energy input. This is to ensure transparency of the treatment process, helping patients feel secure and confident in their treatment.

Basic Principles of InMode Treatment

*Radiofrequency (RF) lifting treatments can generally be divided into monopolar and bipolar methods.

1. Monopolar

The monopolar method works by generating radiofrequency energy from a single electrode and reabsorbing that energy through a grounding pad attached to the body.

This energy is delivered deep into the skin, allowing for deep heating effects. However, there is a possibility of feeling a somewhat strong sensation during the treatment.

2. Bipolar

The bipolar method involves radiofrequency energy flowing between two electrodes, primarily targeting the skin surface and dermal layer.

This treatment is associated with less discomfort and can be performed relatively comfortably. However, there may be limitations in delivering energy to relatively deeper fat layers.

*Why InMode FX works on the fat layer despite being a bipolar method

As mentioned above, bipolar radiofrequency energy is generally known to have difficulty reaching deep into the fat layer.

However, InMode FX uses a specific method that overcomes the typical limitations of bipolar systems, allowing it to effectively target the fat layer.

A key factor in this characteristic is the vacuum suction function built into InMode FX.

Vacuum suction technology gently lifts the skin and the subcutaneous fat layer beneath it, positioning them between the two electrodes.

After holding the tissue fixed between the electrodes, radiofrequency energy is delivered. This allows heat energy to efficiently reach the fat layer, despite it being a bipolar system.

This treatment method induces damage to fat cells by heat within a specific temperature range of 42-45 degrees Celsius.

Damaged fat cells release their contents, which are then naturally expelled from the body through the lymphatic circulation process. Simultaneously, collagen production can be stimulated in the dermal layer.

As a result, you can expect two benefits simultaneously: fat reduction and improved skin elasticity.

*Key Effects of InMode FX

1. Fat Cell Breakdown

The FX procedure induces damage to fat cell membranes by maintaining a constant temperature of 42-45 degrees Celsius or higher for at least 6 minutes.

Damaged fat cells release their contents, which are then naturally expelled from the body through the lymphatic circulation process.

Areas with excess fat, like the cheeks or a double chin, can benefit from fat reduction treatments.

2. Stimulate Collagen Production

As fat is broken down, thermal energy reaching the dermis stimulates fibroblasts to produce new collagen.

At the same time, existing collagen fibers contract, which can give a feeling of skin tightening.

*What to Expect from InMode Forma Treatment

Forma uses a treatment method that primarily delivers radiofrequency energy to the relatively superficial dermal layer of the skin, rather than the fat layer.

The treatment device is gently glided over the skin surface, delivering heat in the range of approximately 42-43°C.

This heat stimulates fibroblasts, which can help improve fine lines, enlarged pores, and reduced skin elasticity.

Forma features a real-time skin temperature feedback system, allowing for a consistent temperature to be maintained throughout the treatment.

This ensures the skin doesn't get excessively hot, while uniform heat delivery helps stimulate collagen production.

Immediately after treatment, you might feel a skin-tightening sensation, and then new collagen can be produced over approximately 2 to 6 weeks.

*Which Areas Are Best Suited for FX and Forma?

The degree of sagging or fat accumulation in various facial areas can have different underlying causes.

- Double Chin

A double chin is usually caused by excessive subcutaneous fat accumulation or weakened muscles under the chin.

FX delivers radiofrequency heat to the fat layer in this area, which helps break down fat cells and encourages collagen regeneration, potentially improving the elasticity of the skin under the chin.

If you have a double chin with thin skin or significant loss of elasticity, combining Forma treatment can provide complementary care.

- Cheek Fat Below the Cheekbones (Deep Cheek Fat)

This is part of the mid-face aging process where fat in the cheek area sags downward with age. FX treatment can help reduce unwanted fat,

and by enhancing skin elasticity with Forma, you can expect a more refined and smoother facial contour.

- Cheek Area / Side Cheeks

Enlarged pores, fine lines, and rough skin texture are signs of reduced collagen density in the dermis.

Forma uses thermal stimulation to promote fibroblast activity, helping to produce collagen and elastin. This can help increase skin surface density and improve its texture.

- Jawline

A less defined jawline is often due to reduced skin elasticity rather than fat. In these cases, Forma treatment can intensively target the dermal layer to promote collagen contraction and regeneration,

and if needed, FX can be combined to help create an even smoother and more sculpted contour.

- Around the Eyes, Forehead, Around the Mouth

These areas are prone to fine lines and typically have relatively thin and sensitive skin.

Forma can achieve effective results even with lower energy settings, making it a suitable treatment for these delicate areas that require a gentle approach.

*What to Consider When Choosing InMode Treatment

The results of InMode treatment aren't the same just because the equipment is available.

It's crucial to carefully assess the skin condition of each treatment area, select the appropriate handpiece, adjust the thermal energy delivery depth, and set the right cumulative energy amount.

For example, with Forma treatment,

Simply delivering a warm sensation may not be enough to sufficiently stimulate collagen production.

It's important that the actual temperature of the skin's dermal layer is maintained at approximately 42-43°C for at least 10 minutes,

and a cumulative energy of 8-12kJ or more must be delivered per treatment area to properly stimulate fibroblasts and produce collagen.

The same goes for FX treatment. Rather than simply applying radiofrequency energy, vacuum suction and thermal energy work together,

when deep heat exceeding 42°C is delivered for at least 6 minutes, both fat breakdown and collagen contraction can occur.

More than 8-15kJ of energy must be applied per area, and for areas with thin skin or those prone to bruising, adjusting the vacuum pressure is also crucial.

Applying FX treatment to the fat layer first, followed by Forma for a finishing lift, can create a synergistic effect.

This process involves appropriately managing any swelling and heat that may occur after the procedure to reduce discomfort, and helping the lifted facial contour settle naturally.

Key considerations are as follows:

When considering InMode treatment, while the functionality of the equipment itself is important, it is advisable to carefully examine the competence of the medical staff performing the procedure. This is because a deep understanding of skin and anatomical structures, the ability to precisely handle the equipment, and the insight to implement personalized designs can influence the treatment results.

Our medical staff considers these points important and continuously researches and strives to establish a lifting treatment plan tailored to the individual characteristics of each patient.

Even for the same InMode treatment, meticulous adjustments are required depending on each patient's skin condition and concerns. We strive to provide such a customized treatment experience.

Treatment Process

Stage 1, FX mode, utilizes radiofrequency energy and IRE (electrical stimulation) technology together. This energy works at various depths, from the epidermis to the SMAS layer, to manage unnecessary fat and promote new collagen production. This can contribute to overall facial contour improvement.

In Stage 2, FORMA mode, thermal energy is intensively delivered to the dermis layer. This action stimulates the production of new collagen, which can have a positive effect on reducing fine lines and improving overall skin elasticity.

All treatment procedures are directly performed by experienced medical staff.