Reduce burden, improve elasticity and fat together, Onda Lifting!

Here's what we consider during Onda Lifting treatment.

1. Pre-treatment design and handpiece usage planOur medical team creates a personalized treatment plan tailored to your skin condition and lifting goals. We carefully examine and diagnose areas requiring improved skin elasticity or contouring. Then, we use 3mm and 7mm handpieces, applying them appropriately to each area. We avoid areas where hollowing of the cheeks is a concern and focus more on areas that require skin tightening.

2. Customized Energy AdjustmentWhen treating the face, energy can be adjusted and used from 60,000 to 120,000 Joules. Rather than simply applying strong energy, we carefully set and apply the energy according to your individual skin condition and desired results.

3. Handpiece Movement Speed AdjustmentThe skin tissue's response can vary depending on the Onda device's handpiece movement speed. We adjust the speed to move slowly where sufficient thermal energy delivery is needed and quickly over sensitive skin areas. By doing so, we aim to reduce unnecessary heat damage to the skin while achieving the desired effects.

4. Individual Shot Distribution StrategyWe don't just use two handpieces; we carefully assess your skin volume and fat distribution to adjust the shots. For example, if you have less fat on your face, we primarily use the 3mm tip. For those with more fat in the double chin or below the jawline, we increase the proportion of 7mm tip usage during treatment.

Onda Lifting Treatment Operational ApproachOnda Lifting treatments are often consistently performed at 90W; however,we apply a method where we rapidly raise the skin temperature with a high output of 100-110W at the beginning of the treatment, then maintain 90W to complete the procedure.This treatment method has the following characteristics:Reduced Skin Tissue Reaction TimeEven if the total energy delivered is the same, starting the treatment with a higher output causes the tissue temperature in the treated area to rise more quickly.This can help shorten the time it takes for the necessary thermal energy for the treatment to reach the tissue.As a result, it is possible that the point at which skin tissue begins to react to thermal stimulation may be brought forward.Reduced Energy Loss in Key Reaction AreasDelivering energy with high output for a short period can help reach the target treatment temperature quickly before heat excessively diffuses into surrounding tissues.This method can be useful for reducing unnecessary epidermal stimulation while inducing the primary reaction in the dermal and subcutaneous fat layers.Efficient Treatment ProgressIf the treatment were performed with only a single output of 90W, it might take more time for the tissue to reach a sufficiently reactive temperature.This means that the total amount of energy irradiation might need to increase to achieve the necessary thermal reaction.However, starting with a high output helps reach the target thermal energy within a short time.Subsequently, output can be adjusted, allowing for consideration of treatment safety.Changes Patients May ExperienceCompared to the 90W single-output treatment method,the lifting effect may be felt a little more quickly,and the sensation of the skin tightening firmly immediately after treatment may be more evident.Since the output is adjusted before the sensation of heat becomes excessive during the treatment,it can help alleviate excessive pain or discomfort experienced during the procedure.Thus, even if the total energy is the same (e.g., 60,000 Joules), the treatment results may vary somewhat depending on the output adjustment method.We strive to ensure that this treatment approach leads to positive results for our patients.

Core Principles of Onda Lifting TreatmentSimultaneous Lifting and Tightening EffectsOnda Lifting is a procedure that delivers thermal energy to the dermal and subcutaneous fat layers using 2.45GHz ultra-high frequency microwaves. This method is known as a device that can simultaneously achieve lifting and skin tightening effects.Microwaves utilize the principle of vibrating water molecules within the skin to generate frictional heat. This generated thermal energy induces collagen contraction and production, and also contributes to the reduction of fat cells, allowing you to experience a lifting effect immediately after the treatment.Microwave energy interacts with water within the skin to generate heat. As a result, it delivers the necessary energy and thermal effects primarily to the dermal and subcutaneous fat layers, while providing relatively less stimulation to the epidermis.The Onda device offers the advantage of performing both lifting and tightening treatments from a single platform.

4. 개인별 샷 배분 전략

두 가지 핸드피스를 단순히 사용하는 것에 그치지 않고, 환자분의 피부 볼륨이나 지방 분포를 면밀히 파악하여 샷을 조절합니다. 예를 들어, 얼굴에 지방이 적은 경우 주로 3mm 팁을 사용하며, 이중턱이나 턱선 아래 지방이 많은 분들께는 7mm 팁 사용 비중을 늘려 시술을 진행합니다.

온다리프팅 시술의 운용 방식

온다 리프팅 시술은 대개 90W로 일관되게 진행되는 경우가 흔합니다만,

저희는 시술 초기에 100~110W의 높은 출력으로 피부 온도를 신속하게 올린 후, 90W로 유지하며 시술을 마무리하는 방식을 적용합니다.

이러한 시술 방식은 다음과 같은 특징을 가집니다.

피부 조직 반응 시간 단축

총 전달되는 에너지 양은 같더라도, 높은 출력으로 시술을 시작하면 시술 부위의 조직 온도가 더 신속하게 상승합니다.

이것은 시술에 필요한 열에너지가 조직에 도달하는 시간을 단축하는 데 도움이 될 수 있습니다.

결과적으로 피부 조직이 열 자극에 반응하기 시작하는 시점이 앞당겨질 가능성이 있습니다.

핵심 반응 부위의 에너지 손실 감소

짧은 시간 동안 높은 출력으로 에너지를 전달하면, 열이 주변 조직으로 과도하게 확산되기 전에 시술 목표 온도에 빨리 도달하는 데 기여할 수 있습니다.

이 방식은 표피의 불필요한 자극은 줄이면서, 진피층과 피하 지방층에서 주된 반응을 유도하는 데 유용할 수 있습니다.

효율적인 시술 진행

만약 90W 단일 출력으로만 시술을 할 경우, 조직이 충분히 반응하는 온도로 올라서는 데 더 많은 시간이 소요될 수 있습니다.

이것은 필요한 열 반응을 얻기 위해 총 에너지 조사량이 증가할 수도 있다는 의미입니다.

그러나 높은 출력으로 시작하는 방식은 짧은 시간 내에 목표하는 열 에너지에 도달하도록 돕습니다.

이후에는 출력을 조절해 시술의 안전성 측면도 함께 고려할 수 있습니다.

환자분들이 경험하실 수 있는 변화

90W 단독 시술 방식과 비교 시

리프팅 효과가 조금 더 신속하게 느껴질 수 있으며,

시술 직후 피부가 탄탄하게 조이는 듯한 느낌이 더 분명하게 나타날 수 있습니다.

시술 중 열감이 과도하게 올라가기 전에 출력을 조절하기 때문에,

시술 과정에서 통증이나 불편감이 지나치게 느껴지는 것을 완화하는 데 기여할 수 있습니다.

이처럼 총 에너지는 같더라도 (예: 6만 줄), 출력 조절 방식에 따라

시술 결과는 다소 다르게 나타날 수 있습니다.

저희는 이러한 시술 접근이 환자분들께 긍정적인 결과로 이어지도록 노력하고 있습니다.

온다리프팅 시술의 핵심 원리

리프팅 및 타이트닝 동시 효과

온다리프팅은 2.45GHz 극초단파 마이크로웨이브를 이용하여 진피층과 피하 지방층에 열 에너지를 전달하는 시술입니다. 이 방식은 리프팅과 피부 타이트닝 효과를 동시에 기대할 수 있는 장비로 알려져 있습니다.

마이크로웨이브는 피부 내 수분 분자를 진동시켜 마찰열을 생성하는 원리를 활용합니다. 이렇게 발생한 열 에너지는 콜라겐의 수축과 생성을 유도하고, 지방세포 감소에도 관여하여 시술 직후에도 리프팅 효과를 경험할 수 있습니다.

마이크로웨이브 에너지는 피부 속 수분과 상호작용하여 열을 생성하는 특성을 가집니다. 이로 인해 표피에는 상대적으로 적은 자극을 주면서도, 진피층과 피하 지방층에 필요한 에너지를 집중하여 열 효과를 전달하게 됩니다.

온다 장비는 하나의 플랫폼으로 리프팅과 타이트닝 시술을 함께 진행할 수 있는 장점이 있습니다.

Lifting is primarily a procedure to improve facial contours, while tightening focuses on enhancing skin texture and elasticity. Onda treatment is designed to consider both of these objectives.

How Onda Lifting Works

During Onda Lifting treatment, 3mm and 7mm handpieces targeting two different depths are utilized.

The 3mm handpiece delivers concentrated energy to the dermis and the boundary between the dermis and subcutaneous fat layer.

When heat is delivered to this depth, it induces the production of collagen and elastin fibers. Simultaneously, it promotes hyaluronic acid production and causes the contraction of existing collagen. As a result, you can expect an immediate skin tightening effect.

If there is edematous fatty tissue, water drainage may occur, making it possible to observe changes in facial lines immediately after the procedure.

The 7mm handpiece reaches deeper into the subcutaneous fat layer, selectively damaging fat cell membranes and inducing cell death (apoptosis).

Damaged fat cells are expelled from the body through the lymphatic system, contributing to improved facial contours. Typically, changes begin gradually 2-3 weeks after the procedure, and contour changes can be felt around 4 weeks. The most noticeable changes may appear around 6 weeks, and since the dead fat cells do not regenerate, the changes can be maintained for a relatively long time.

Furthermore, it can lead to immediate contraction of the retaining ligaments, potentially contributing to a lifting effect even immediately after the procedure.

Collagen Contraction Inducing Temperature: Collagen in the dermis actively contracts at temperatures of approximately 60-65 degrees Celsius. To reach this temperature range, the treatment know-how of moving the handpiece not too quickly to deliver sufficient energy is crucial.

Microwaves have a water-selective absorption characteristic. This energy is primarily absorbed by water, which minimizes stimulation to nerves or blood vessels. By selectively concentrating heat only on the water-rich areas of fat cells and the dermis, it can reduce the burden of pain during treatment. It also lowers the risk of side effects, helping to provide a relatively comfortable lifting procedure.

Lifting Procedures to Consider Together

Onda Lifting can be performed alone, but a synergistic effect can be expected when combined with treatments like Shurink (targeting the fascial layer) or Oligio (radiofrequency tightening). In such cases, the satisfaction with the results is likely to be higher.

In particular, performing multiple treatments on the same day allows for more efficient control of thermal energy accumulation. This can contribute to increased satisfaction after the procedure.

Our Medical Team's Treatment Philosophy

Our medical team is continuously accumulating clinical experience with Onda Lifting procedures.

However, considering each patient's individual facial characteristics, we meticulously plan customized lifting designs.

Our medical team does not simply perform procedures; we continuously research how to provide more natural and satisfying lifting results.

Beyond just using equipment, we strive to deeply understand each patient's skin texture and flow. We believe that creating natural changes in facial contours through this understanding is an important part of the treatment.

The results of Onda Lifting can vary significantly not only due to the performance of the equipment but also the skilled experience and delicate touch of the medical staff performing the procedure.

Such a delicate approach, considering each individual's condition, can positively influence the treatment results.

Factors for Expecting Rapid Changes with Onda Lifting

Onda Lifting is a procedure that utilizes microwave energy to deliver concentrated heat to depths of 3mm and 7mm within the skin.

During this procedure, collagen fibers are rapidly heated to temperatures above 65 degrees Celsius, inducing an immediate contraction response.

Therefore, in some cases, you may feel a certain degree of lifting effect immediately after the procedure.

Onda Lifting can help reduce the psychological burden of waiting for slow-appearing changes.

One of the known characteristics of Onda Lifting is that you can experience improved elasticity and lifting effects in a relatively short period.

Therefore, it can be a suitable treatment method for those who expect relatively quick improvements.

Systematic Approach to Onda Lifting Treatment

1. Pre-treatment Design and Handpiece Utilization Strategy Establishment

Prior to treatment, a precise design process tailored to each individual's face is extremely important.

After thorough consultation, our medical team comprehensively analyzes skin elasticity, fat distribution, facial volume, and the necessary direction for lifting. Based on this analysis, the treatment areas are carefully planned.

In accordance with these analysis results, the 3mm handpiece (for dermal stimulation) and the 7mm handpiece (for targeting the fat layer) are appropriately applied to each facial area.

This can be described as a design-centric, strategic approach to lifting treatment that goes beyond simply operating equipment, considering the unique characteristics of each patient.

2. Appropriate Energy Application and Precise Treatment Settings

During Onda Lifting treatment, the total amount of energy is a crucial factor influencing the outcome.

Our medical team adjusts and applies energy from 60,000 Joules to over 120,000 Joules, depending on the patient's individual condition. In addition, we ensure sufficient treatment time and meticulously plan cooling strategies to prevent overheating.

3. Handpiece Speed Control and Heat Accumulation Management

In Onda treatment, the effective accumulation of thermal energy is closely related to the lifting results.

During the procedure, the handpiece is moved relatively slowly in the initial stages to accumulate thermal energy. Subsequently, the speed is adjusted based on the condition of the treatment area, aiming to reduce the risk of potential burns.

Treatment results may vary depending on the medical staff's delicate operative skills and proficiency.

4. Customized Handpiece Utilization and Treatment Plan Based on Individual Skin Condition

A personalized treatment plan is developed based on the amount of fat in the cheek area and the level of skin elasticity reduction.

After closely analyzing facial volume, fat distribution, and skin thickness, the proportion of 3mm and 7mm handpiece usage is determined.

For example, if there is a lot of fat in the jawline, the 7mm handpiece is mainly used, while the 3mm handpiece is primarily applied to areas where volume reduction is a concern, such as below the cheekbones.

Beyond simply delivering energy, treatments are performed according to a carefully planned, individualized strategy.

5. Principal Director's Meticulous Design and Continuous Research Efforts

Performing numerous Onda Lifting treatments daily, the medical staff continuously accumulates clinical experience.

However, all treatment designs are customized individually to each patient's characteristics.

Outside of consultation hours, the principal directors continuously simulate patients' facial changes and research energy settings and handpiece placement methods for better improvement.

The results of Onda Lifting may vary depending on the design capabilities of the medical staff performing the treatment.

Onda Lifting is not merely the use of mechanical equipment; it is a procedure perfected by the medical staff's skilled expertise.

Who Should Consider This Treatment

• 01. Those who want to improve a double chin or jowls and achieve a more defined jawline
• 02. Those concerned about sagging skin along with deepened nasolabial folds
• 03. Those who have undergone other lifting treatments but feel that the improvement in their facial contours or skin elasticity is insufficient
• 04. Individuals aged 30 to 50 experiencing fat accumulation and reduced skin elasticity
• 05. Those who wish to minimize concerns about pain or recovery time during treatment

Benefits of the Treatment

• 01. Discomfort during the procedure is reduced thanks to the excellent cooling system.
• 02. After the treatment, a firming and tightening effect on the skin can be expected.
• 03. It is possible to return to daily activities immediately after the treatment.

Treatment Process

• STEP 01. After cleansing, a one-on-one customized consultation is conducted.
• STEP 02. Oil is applied to the treatment area.
• STEP 03. Onda Lifting treatment begins.

Post-Treatment Precautions

• ㆍYou can wash your face and apply makeup immediately after the treatment.
• ㆍIt is advisable to refrain from visiting saunas or jjimjilbangs, and from consuming alcohol or smoking for approximately one week.
• ㆍOccasionally, warmth may be felt in the treated area, and dryness may accompany it. In such cases, please apply a sufficient amount of moisturizer.
• ㆍWhen engaging in outdoor activities, it is recommended to carefully apply sunscreen to protect the skin from UV rays.